Configuring L2TP/Xauth/IKEv2 on NG Firewall

This article describes how to configure L2TP/Xauth/IKEv2 on the Untangle for use with various devices. 

You will find device configuration links at the bottom of the article.

 

  1. Go to APPS.

  2. Open IPsec VPN Settings.

  3. Click the VPN Config tab.

  4. Click Enable L2TP/XAuth/IKEv2 Server.

  5. If you wish, you can change the Address Pool, but it must be a unique subnet that is not already defined on the NGFW.

  6. Specify an IPSec Secret. This will need to be added to the VPN client on the user computers as a second level of authentication.

  7. If you want to be able to connect on more than one external IP address, or if you want to use an address that is not the Primary WAN, you can change it in the Server Listen Addresses field.

  8. Click Save. 
    L2TP.png
    Clicking the image above will load it, full-size, in a new window.

  9. Once the config changes have been saved, click Configure Local Directory to be taken to Config > Local directorycld.png
    Clicking the image above will load it, full-size, in a new window.

 

Setting up user authentication:

  1. Go to Config. 

  2. Select Local Directory.

  3. Click Add.

  4. Add all of the users you want to be able to use L2TP. The username and password you specify here will be what they use to connect to the VPN.

  5. Click Done.

  6. Click Save. 

LD1.png
Clicking the image above will load it, full-size, in a new window.

 

Device Configurations

Connect an Android Device to NG Firewall via L2TP

Connect To NGFW L2TP VPN In Windows 7

Connect To NGFW L2TP VPN In Windows 10

Connect To NGFW L2TP VPN In iOS

 

 

 

 

 

 

 

 

 

Follow
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.

Powered by Zendesk