Follow

L2TP VPN - Windows 10 Configuration

This article describes how to deploy L2TP over IPSec VPN connections on Windows 10.

NOTE - This article was written using Windows 10 OS Build 14393.351.  To check your build number type winver in the Windows "Ask me anything" box.  Mismatched version may lead to mismatched settings.  

 

  1. Click the Start button in the bottom left corner of the screen.  Click on Settings.

  2. Click on Network & Settings.


  3. Select VPN in the left-hand menu.  Then click on Add a VPN connection


  4. For the VPN Provider field select Windows (built-in).  Fill in each field:
    • Connection name - Can be anything
    • Server name or address - This will be the public IP of the NGFW.  If there are multiple public IP's this would be whatever IP address is in the Server Listen Addresses under the VPN Config tab.
    • VPN type - L2TP/IPSec with pre-shared key
    • Pre-shared key - enter the IPSec Secret from the VPN Config tab of the IPSec module on the NGFW.
    • Type of sign-in info - User name and password
    • User name (optional) - The username to be used for this connection
    • Password (optional) - The password to be used for this connection


  5. Click on Change adapter options


  6. In the connections list find the connection named in Step 4.  Right click on that connection and select Properties.


  7. On the Security tab, select Allow these protocols then check the box labeled Microsoft CHAP Version 2 (MS-CHAP v2)


  8. Go back to the Network & Internet Settings window and click on the VPN connection.
  9. Click the Connect button.

  10. You should see the status of Connected after the connection completes.  
Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk